Description
Baileigh DP-1000VS drill press variable speed
This variable-speed drill press runs smoothly even at full capacity—and will do so for years at your shop. Unlike pulley-driven drills, this 16″ drill press lets you run tooling at the proper speed to fit your application and extend tooling life.
Features
- 2 hp motor requires 220-volt single-phase power and will work at virtually any shop or site.
- Inverter-driven head drills a maximum capacity of 1” steel.
- You can fine-tune the speed in the range from 150 to 3000 rpm to suit your application.
- Auto-reversing tap has a tapping capacity of 5/8” steel.
- Wide steel column eliminates flexing even when drilling at full capacity.
- Rigid cast iron base and table add strength to the drill’s structure.
- Comes standard with a coolant system, a feature that some competing companies consider an upgrade.
- Includes a safety shield around the drill head to protect you, as well as a halogen light that bends to help you see the project better.
Specifications
| Model Number | DP-1000VS |
| Base Dimensions (In.) | 27″ x 19″ |
| Column Diameter (In.) | 3.62″ |
| Drilling Capacity Cast Iron (In.) | 1.25″ |
| Drilling Capacity Mild Steel (In.) | 1″ |
| Input Power | 220V Single Phase |
| Motor (HP) | 2 HP, 220V, 1 Phase |
| Quill Diameter (In.) | 2.44″ |
| Shipping Dimensions (L x W x H) (In.) | 60 x 44 x 83 |
| Table Slots (In.) | .625″ |
| Tapping Capacity Cast Iron (In.) | 3/4″ |
| Weight (Lbs.) | 600 |
*Specifications subject to change without notice.
WARNING: California Prop 65
