Description
This 1.5 horsepower impeller is engineered for Aqua-Flo 48 and 56 frame wet end assemblies operating with 1.5HP motors drawing approximately 9.0 amps at 230 volts. The impeller features a 2 1/8 inch eye width, 5/16 inch vane width, and 4 inch outer diameter, designed to install between the face plate and volute housing of Aqua-Flo XP2 and FMXP2 wet ends.
Critical Specifications:
- Eye Width: 2 1/8 inches
- Vane Width: 5/16 inch
- Outer Diameter: 4 inches
- Electrical Requirements: 230V/9A or 115V/14A
- Manufacturer Part Number: 91694150
When installing this impeller, we strongly recommend replacing the seal simultaneously. This component requires a PS-200 seal, available separately in our store. Proper horsepower matching is essential—installing an oversized impeller will cause motor overheating and potential damage during high-speed operation.
Frame Identification Guide: The 48 frame design has motor through-bolts spaced 3 5/8 inches apart (5 3/16 inches in X pattern) with 1/4 inch bolt heads. The 56 frame features 4 1/8 inch spacing (5 3/4 inches in X pattern) with 5/16 inch bolt heads.
Amperage Reference: A 115-volt motor operating with a 1.5HP impeller typically draws approximately 14.0 amps at high speed, while a 230-volt motor draws roughly 9.0 amps. Always verify your motor’s specifications before ordering. Due to the technical nature of this component, all sales are final—please confirm compatibility prior to purchase.
