Description
The M.O.R.E. Jeep® CJ shackle reversal system is a weld on do it yourself kit with all hardware included. A shackle reversal system or “SRS” allows the front suspension to travel in a much more natural action when the spring compresses. All of the pieces to build your own Jeep® S.R.S. are in this kit. If you are a welder/fabricator and can handle the assembly of the pivot brackets, weld them together by using your Jeep® frame as a jig. All of the cutting, punching of holes and slots, bending and most importantly, geometry for correct axle placement is already done for you. It will work with or without a lift kit, spring under or over the axles. Shackle plates ship in bare steel, not zinc plated. Stubby Kit versions with more front approach clearance also available. This kit designed for Wrangler YJ Springs comes with wider tubes and bushings to insert in the frame so you can install the wider Jeep® YJ Wrangler springs. Why, you ask? The Wrangler springs typically have a softer spring rate than CJ’s adding to flexibility and ride quality. These brackets gain you 1 7/8 more clearance. Don’t let that bracket hanging down hang you up on that rock. These Stubby brackets are shorter in height which gives you more clearance for those obstacle’s.
