Description
Scraping flat bottoms and establishing true 90-degree corners requires a blunt, stable edge. This 1″ square end chisel is designed for truing up straight tenons and smoothing box bottoms, providing a heavy profile that rests securely to prevent catching. It is the perfect scraping tool for finishing flat surfaces inside bowls or boxes where a gouge cannot leave a perfectly level floor.
Features
- Straight 90-Degree Edge – scrapes perfectly flat surfaces and creates sharp, square shoulders.
- Thick Steel Profile – reduces vibration when extending over the tool rest into hollow forms.
Specifications
- Size: 1″ (25.4 mm)
- Tool Type: Square End Chisel
- Supplier Part Number: CH420
- KMS Product Code: SLI-CH420
Common Shop Applications
- Truing up the bottom of turned boxes.
- Cleaning tenons for chuck mounting or joinery.
Recommended Shop Add-Ons
- Most bowl turners also grab: Burnishing Tool – Used to roll a small burr on the edge for more aggressive scraping.
- Don’t forget: Digital Depth Gauge – Ensures you don’t scrape through the bottom of your project when truing up floors.
Frequently Asked Questions
Q: Is this a cutting tool or a scraper? A: It is used as a scraper. It should be presented to the wood slightly trailing (handle high) to peel off fine ribbons of wood.
Q: Can I use this for final finish on the outside of a bowl? A: Yes, it works well for smoothing flat or slightly convex exterior profiles on large turnings before sanding.
